0

After repairing model in what extension should the item be saved?

Clell vor 2 Jahren aktualisiert von anonymous vor 2 Jahren 1

Antwort

+1
Antwort

Hello,


You can save your repaired file in 3 different formats.


  •  3D File as an OBJ/STL/3MF. This way is good if you would like to slice the file with a 3rd party slicer such as  CURA or Slic3r or if you are using an SLS or Inkjet printer.
  • G-code This is a good way if you would like to send the file directly to the 3d printer  (The file will be already sliced) This is will only work with FDM printers 
  • SVG if you are using a DLP (UV based 3d printer).

Let me know if you have any questions.


All the best,

Faisal

+1
Antwort

Hello,


You can save your repaired file in 3 different formats.


  •  3D File as an OBJ/STL/3MF. This way is good if you would like to slice the file with a 3rd party slicer such as  CURA or Slic3r or if you are using an SLS or Inkjet printer.
  • G-code This is a good way if you would like to send the file directly to the 3d printer  (The file will be already sliced) This is will only work with FDM printers 
  • SVG if you are using a DLP (UV based 3d printer).

Let me know if you have any questions.


All the best,

Faisal